Litecast LED Coloured Wall Washer Kit – Red, Green or Blue (DConnect 24v Plug & Play)
From: £49.00£29.40
The Litecast is part of the DConnect Plug & Play Range. This LED Coloured Wall Washer has 12 bright 1w LED units (12w) in a weatherproof and durable aluminium housing. A PMMA (acrylic) lens protects the 12 LED units. Once illuminated, the impressive bright light works fantastically as an LED Wall Washer, but is equally as effective as an uplighter or downlighter. The LEDs are impressively bright, with well over 100 lumens per watt!
The Litecast is supplied with a detachable 24v Constant Voltage LED Driver – 15 Watts.
Red, Green or Blue Colour options
Additional DConnect Extension Cables also available as an accessory to enable a more remote placing of the driver, further away from the fitting (1m, 3m or 5m).
Litecast – LED Coloured Wall Washer – 12w LED Uplighter – Red, Green or Blue (24v)
DConnect Plug & Play – Supplied with 24v Constant Voltage LED Driver
The Litecast is part of the DConnect Plug & Play Range. This LED Coloured Wall Washer has 12 bright 1w LED units (12w) in a weatherproof and durable aluminium housing. A PMMA (acrylic) lens protects the 12 LED units. Once illuminated, the impressive bright light works fantastically as an LED Wall Washer, but is equally as effective as an uplighter or downlighter. The LEDs are impressively bright, with well over 100 lumens per watt! Embrace Coloured Light in the garden for an elegant paradise with a choice of Red LED, Blue LED or Green LED. They are also perfect to use as Christmas Lights.
If pointing vertically, the light diffuses over at least 4 metres. Importantly, the angle of the Litecast adjusts to suit the lighting effect you desire. There are two adjustable foot brackets that fix to any flat surface. These ‘feet’ slide along the base of the light by loosening the stainless steel screws. Also, aluminium Ground Spikes are available for in-ground mounting (select above).
The Litecast is supplied with a detachable 24v Constant Voltage LED Driver – 15 Watts. A 3 pin UK plug attaches to 1.5m of fixed 3 core rubber waterproof input cable ensuring easy installation with no wiring. The 240v AC mains input then converts to 24v DC output via the transformer. The output cable has a ‘D-Connector’ plug & play male 2 pin adaptor for easy installation. Ideally the transformers should be installed above ground on a suitable post or wall via the easy to use surface mount clips.
Additional DConnect Extension Cables also available as an accessory to enable a more remote placing of the driver, further away from the fitting (1m, 3m or 5m).
WARM WHITE & DAYLIGHT WHITE VERSIONS ARE ALSO AVAILABLE – CLICK HERE
| Wattage | 12W |
|---|---|
| Voltage | 24v DC |
| Materials | Acrylic (PMMA), Aluminium |
| IP Rating | IP65 |
| Lumen Output | 1320 Lm |
| Colour | Blue, Green, Red |
| Transformer Supplied | 15W 24v DC Transformer (IP67) |
| Cable Length approx. (m) | 0.2m |
| Plug Type | DConnect Plug & Play – 2 Pin (female) |
| Range | DConnect 24v Plug & Play |
litecast instructions
It is important that anybody installing or carrying out maintenance on Lumena Products, including bulb changes, refer to the instruction manual prior to commencing work. Lumena Lights ensure instructions available online are completely up to date and accurate.