24v DC LED Driver – 15w or 30w (DConnect Plug & Play)
From: £14.50£8.70
This 24v DC LED driver is for use with 24v DConnect Garden Lights, particularly the Litecast and Lediflex ranges. A 3 pin UK plug is attached to 1.5m of fixed 3 core PVC waterproof input cable. As a result, no wiring is required. The 240v ACÂ mains input then converts to 24v DC output via the 24v constant voltage LED driver.
The output cable has a ‘D’ Shape plug & play male 2 pin adaptor for easy installation. If 2 core open-end is required rather than plug & play, select the female adaptor from the drop down menu. DConnect Male to Female Extension Cables enable longer cable runs between the driver and the fitting and a more remote placing of the driver. They are available in 1m, 3m and 5m lengths and link together to create any length.
240v – 24v DC LED Driver –Constant Voltage
DConnect 24v Plug & Play
This 24v DC LED driver is for use with 24v DConnect Garden Lights, particularly the Litecast and Lediflex ranges. A 3 pin UK plug is attached to 1.5m of fixed 3 core PVC waterproof input cable. As a result, no wiring is required. The 240v ACÂ mains input then converts to 24v DC output via the 24v constant voltage LED driver. The output cable has a ‘D’ Shape plug & play male 2 pin adaptor for easy installation. If 2 core open-end is required rather than plug & play, select the female adaptor from the drop down menu. Ideally the driver / transformer should be installed above ground on a suitable post or wall via the easy to use surface mount clips.
In addition, DConnect Male to Female Extension Cables enable longer cable runs between the driver and the fitting and a more remote placing of the driver. They are available in 1m, 3m and 5m lengths and link together to create any length. Lumena recommend a maximum cable run of 15m to prevent voltage drop.
Additional extension cables can also be purchased.
IMPORTANT INFORMATION
DO NOT SUBMERGE IN WATER. Although rated IP67, if the input mains voltage cable should become damaged, a risk of electrocution could result
UK Plug should be located indoors or connected to a waterproof socket.
To ensure that the correct size 24v constant voltage LED driver is used, the total wattage of lamps to be powered must be known. If multiple fittings are used, this is calculated easily by multiplying the lamp wattage with the number of fittings. Remember not to overload the transformer. Example: a 15 watt driver will power lights with a total wattage of 3w to 15w.
| OUTPUT CABLE | 0.25m |
|---|---|
| Input | 230v – 240v (50Hz) |
| Input Cable | 3 Core H05RN-F Rubber Cable (1.5m) with 3-Pin UK Plug |
| Output | 24v DC |
| Plug Type | DConnect Plug & Play – 2 Pin (male) |
| IP Rating | IP67 |
| DConnect Extension Cable | 0.25m Extension (Female to Open-end), 1m Extension (Male to Female), 3m Extension (Male to Female), 5m Extension (Male to Female), NONE |
| Driver Type | Electronic |
| Additional Information | Short Circuit & Overload Protection |
