Cubik – 12v Square Recessed Light – Stainless Steel (304)
From: £31.00
The 12v ‘Cubik’ is a recessed light with a choice of either a 100mm or 120mm square front bezel. Made from corrosion resistant 304 stainless steel, the Cubik has a contemporary look which will complement any modern environment. A hard protective sleeving adds to the durability of the fitting, protecting the lower section of aluminium which will be mounted into brick (driveway or wall), decking or the ground. Different cable lengths are available.
Not for use in areas prone to flooding
The 12v ‘Cubik’ square decking light is a recessed light with a choice of either a 100mm or 120mm square front bezel. With a faceplate made from corrosion resistant 304 stainless steel, the Cubik has a contemporary look which complements any modern environment. A hard protective sleeving adds to the durability of the fitting, protecting the lower section of aluminium when mounted into brick (driveway or wall), decking or the ground. Different cable lengths are available.
Not for use in areas prone to flooding
| Voltage | 12v |
|---|---|
| Max Wattage | 35w |
| Bulb Holder | MR16 |
| Bezel Size (mm) | 100mm, 120mm |
| Lens & Rubber Seal | Clear Lens, Frosted Lens |
| Installation Hole Size | 87mm |
| Cable Length approx. (m) | 1.0m, 3.0m |
| Cable Type | 0.75mm 2 Core (H05RN-F) |
| IP Rating | IP67 |
| Materials | Glass, Stainless Steel (304) |
| Guarantee | 2 Years, Reduced 1 year warranty period for cable |
| Additional Information | Allen Key Kit Included |
Garden Lighting Made Easy!
Lumena offer a large range of high end 12v Plug and Play lighting and accessories making it very simple and easy for quick DIY installation. Low voltage lighting is particularly suited to outdoor environments because it tolerates the damp conditions without performance being affected. Anything required underwater should also be low voltage as it is much safer.
When it comes to connections, there are multiple cables and adaptors which are suitable for various 12v plug and play lighting systems. Lumena’s Versa plug & play system is compatible with a number of brands such as Techmar. Cables are available in various length in various combinations of plug & play and open end. In addition, 3 way and 6 way connectors make it very simple for connecting components and fittings to just one transformer.
12v lightings requires a transformer in order for these to be powered. A transformer converts 240v mains down to 12v low voltage. We stock various wattage transformers (10w, 20w, 50w and 100w). Calculate which size transformer is required for a circuit following this simple formula:
Lamp Wattage x Lamp Quantity = Total Wattage Required (minimum)
Example: 5W MR16 x 3 fittings = 15W (20W transformer required)
You must never exceed the wattage of a transformer, and avoid underloading. The ideal capacity is 75-90% load.
12v Lighting Set-up Example
12v lighting circuits can use a combination of plug and play and hard wired components. Versa Plug & play is simple with various compatible adaptors, cables and transformers available. Easily convert plug and play to hard wired with our plug & play to open ended cable. Standard junction boxes and in-line connectors can then be used to connect the two systems together.
