Slatlite 12V Louvered Step Light – Brass (Rustic Bronze Finish) – VERSA Plug & Play

£50.00 £60.00 (inc vat)

This solid brass Slatlite Steplight with bronze finish is a smart 12v surface mount garden light ideal for lighting stepped areas, either mounted on walls next to steps, or on the steps themselves. The louvered design creates a more subtle light than a full spotlight, shining the light downwards at an angle. A mirrored reflector and frosted glass lens inside diffuse the light outwards evenly and without glare.

In stock

SKU: SLAT12-P Categories: 12V Decking Lights & Step Lights, 12v Plug & Play - VERSA Range, 12v Plug and Play Lights - (Versa), 12v Wall Lights, Charleston Brass & Copper Lighting, Recessed Lights - Brick Lights & Step Lights, Step Lights Tags: 12v, brass, bronze, louvred, low voltage, Plug & Play, slatlite, step light, steplight, Versa

The Slatlite louvered step light with bronze finish is a smart 12v surface mount garden light. The slatted faceplate makes this louvered step light ideal for illuminating stepped areas. It can be mounted on walls next to steps, or on the steps themselves. Six brass louvers not only add durability but also create a more subtle light than a full spotlight, shining the light downwards at an angle. A mirrored reflector and frosted glass lens inside diffuse the light outwards evenly and without glare.

The Slatlite is both robust and stylish. Crafted from solid brass, this fitting features a high IP rating of IP54 and has 3 rustic bronze external screws; to firmly secure the front to the back. Complete with a G4 bulb holder, Lumena recommends an LED G4 capsule, which is available as an optional extra. The bright 12 volt LED G4 in daylight white or warm white (sold separately) saves more energy and has a much longer life span than a standard halogen G4. Lumena G4 LED bulbs will work from a normal 12v A/C transformer so there is no need to buy a special LED “Driver”. This fitting arrives with 1.5m of 0.75mm 3 Core – (H05RN-F) cable as standard.

The Slatlite forms part of Lumena’s VERSA Plug & Play Range. For ease of installation, a 2 pin adaptor plugs directly into a Lumena Transformer, or any Versa connectors, meaning no wiring is required. If the project requires an open-ended cable, simply cut off and strip the wire to create a normal connection via a junction box. VERSA Plug & Play connectors are also compatible with other plug and play systems such as Techmar and Lighting for Gardens.

Voltage	12v
Max Wattage	30w
Bulb Holder	G4
Materials	Solid Brass
Finish	Rustic Bronze
IP Rating	IP54
Cable Length approx. (m)	1.5m
Cable Type	0.75mm 2 Core (H05RN-F)
Plug Type	VERSA – Plug & Play (2 pin) – male
Guarantee	2 Years, Reduced 1 year warranty period for cable

slatlite instructions

It is important that anybody installing or carrying out maintenance on Lumena Products, including bulb changes, refer to the instruction manual prior to commencing work. Lumena Lights ensure instructions available online are completely up to date and accurate.

Download File

Garden Lighting Made Easy!

Lumena offer a large range of high end 12v Plug and Play lighting and accessories making it very simple and easy for quick DIY installation. Low voltage lighting is particularly suited to outdoor environments because it tolerates the damp conditions without performance being affected. Anything required underwater should also be low voltage as it is much safer.

When it comes to connections, there are multiple cables and adaptors which are suitable for various 12v plug and play lighting systems. Lumena’s Versa plug & play system is compatible with a number of brands such as Techmar. Cables are available in various length in various combinations of plug & play and open end. In addition, 3 way and 6 way connectors make it very simple for connecting components and fittings to just one transformer.

12v lightings requires a transformer in order for these to be powered. A transformer converts 240v mains down to 12v low voltage. We stock various wattage transformers (10w, 20w, 50w and 100w). Calculate which size transformer is required for a circuit following this simple formula:

Lamp Wattage x Lamp Quantity = Total Wattage Required (minimum)

Example: 5W MR16 x 3 fittings = 15W (20W transformer required)

You must never exceed the wattage of a transformer, and avoid underloading. The ideal capacity is 75-90% load.

12v Lighting Set-up Example

12v lighting circuits can use a combination of plug and play and hard wired components. Versa Plug & play is simple with various compatible adaptors, cables and transformers available. Easily convert plug and play to hard wired with our plug & play to open ended cable. Standard junction boxes and in-line connectors can then be used to connect the two systems together.

What is voltage drop?

The term ‘Voltage Drop’ relates to the amount of voltage loss that occurs through all or part of a circuit. This is a result of increased resistance which is a measure of the opposition to current flow in a circuit, measured in ohms (Ω). Electrical cables of any size and length carrying current always present resistance. Although it can affect the entire circuit, it is first apparent at the end of a cable run. A simple comparison would be a garden hose, where the pressure of water running through it reduces the further away it is from its source.

What causes voltage drop?

The 4 main factors which contribute to voltage drop are cable length, wire temperature, wire material and the cross sectional area. Generally, 12V lighting systems can withstand a maximum voltage drop of up to 8% (1V) with no noticeable effects, on the basis that the correct cable / power source is used and it is within range of the LED lamp voltage. If significant voltage drop does occur, it can cause dim lighting, strobing or no power at all.

How to reduce voltage drop

To reduce the risk of voltage drop, consider the following:

Reduce cable runs – keep length to a minimum with no more than 12 fittings per circuit
Highly conductive wire, e.g. copper. A tinned end can improve performance and longevity
Use high quality, heat resistant rubber cable. Minimum H05RN-F
Use thicker cable where possible (1.5mm² / 2.5mm²) with a secure, watertight connection

For a larger garden where this is not possible, consider laying a mains power feed to various points / areas where additional 12V transformers can be installed to create separate, smaller circuits. 240V fittings can also be connected to the mains feed if required.

Voltage drop cable run guides

Suggested maximum cable run includes cable supplied with each fitting, adaptors and connector cables. Where longer cable runs are required, use thicker cable such as 1.5mm² / 2.5mm² which have a lower resistance and reduce voltage drop. Cable runs can be increased by up to 50% (approx.) when thicker cable is used.

For longer cable runs, thicker cable is recommended. The below table is for 1.5mm and 2.5mm 2 core cable.

The above tables are a guide only. We strongly recommend that the voltage is checked with a volt meter at each fitting prior to final placement. Some external factors can affect performance, such as placement of cable etc.

Newsletter Sign Up